Pytorch nn.Unfold()与nn.Fold()怎么使用

本篇内容主要讲解“Pytorchnn.Unfold()与nn.Fold()怎么使用”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“Pytorchnn.Unfold()与nn.Fold()怎么使用”吧!Unfold()与Fold()一般成对出现。常用用途有：代替卷积计算，Unfold()与Fold()不互逆（参数不一样）（卷积本来就不可逆）图片patch化，Unfold()与Fold()互逆（参数一样，且滑动窗不重叠）Extracts sliding local blocks from a batched input tensor.
在各滑动窗中按行展开（行向量化），然后转置成列向量, im2col 的批量形式input : (N, C, ∗)
output : (N, C ∏(kernel_size), L)输出为：input:
tensor([[[[ 0.4198, 1.0535, 0.1152, 0.3510],
[ 1.1664, 0.3376, 1.2207, 0.3575],
[-0.2174, -1.2490, 0.3432, 0.3388]],[[-1.4956, 0.9746, -0.5145, 0.1722],
[ 1.7041, 0.9645, -0.6937, -1.9037],
[-0.1961, -0.3345, 0.3565, -1.2329]],[[-0.9843, -0.8089, 1.8712, -0.2860],
[ 0.0960, -1.7501, -0.1226, 0.9383],
[-0.1675, 1.1498, -0.4958, -1.2953]],[[-1.2368, 0.5667, 1.4166, -2.2567],
[ 0.9414, 0.8189, 1.5604, 0.1422],
[-1.6414, -1.5594, 0.6718, 1.2319]],[[-0.4093, 0.6691, 1.4003, 0.7444],
[-0.2858, -0.4375, -1.1301, 0.7377],
[-0.0956, -0.1844, 0.7697, -0.3077]]],
[[[ 0.4264, -0.0700, -1.5600, -0.0491],
[ 1.5027, 3.1625, 0.6080, -1.8794],
[-0.3148, 0.6377, -0.7242, 0.1692]],[[ 0.2757, -0.5403, 0.7748, -1.1795],
[ 0.1504, -0.4671, 0.9355, 1.3050],
[-0.4920, -0.8581, 0.0559, -0.0446]],[[ 2.1627, 0.6758, -0.0968, 1.3401],
[-0.1105, 0.8299, -0.3827, -1.0687],
[-0.2234, -1.0423, 1.2436, -0.6514]],[[ 0.8085, -0.4159, 0.2022, 0.5747],
[-0.1265, 0.2828, -1.3530, 0.2831],
[-0.1571, 0.9005, 0.4556, -1.4360]],[[-1.2417, 0.1829, 0.3825, -0.8555],
[-2.0170, 0.7537, 2.3406, 0.5866],
[-1.1704, -1.8986, -0.7958, 0.2652]]]])
output:
tensor([[[ 0.4198, 1.0535, 1.1664, 0.3376],
[ 1.0535, 0.1152, 0.3376, 1.2207],
[ 0.1152, 0.3510, 1.2207, 0.3575],
[ 1.1664, 0.3376, -0.2174, -1.2490],
[ 0.3376, 1.2207, -1.2490, 0.3432],
[ 1.2207, 0.3575, 0.3432, 0.3388],
[-1.4956, 0.9746, 1.7041, 0.9645],
[ 0.9746, -0.5145, 0.9645, -0.6937],
[-0.5145, 0.1722, -0.6937, -1.免费云主机域名9037],
[ 1.7041, 0.9645, -0.1961, -0.3345],
[ 0.9645, -0.6937, -0.3345, 0.3565],
[-0.6937, -1.9037, 0.3565, -1.2329],
[-0.9843, -0.8089, 0.0960, -1.7501],
[-0.8089, 1.8712, -1.7501, -0.1226],
[ 1.8712, -0.2860, -0.1226, 0.9383],
[ 0.0960, -1.7501, -0.1675, 1.1498],
[-1.7501, -0.1226, 1.1498, -0.4958],
[-0.1226, 0.9383, -0.4958, -1.2953],
[-1.2368, 0.5667, 0.9414, 0.8189],
[ 0.5667, 1.4166, 0.8189, 1.5604],
[ 1.4166, -2.2567, 1.5604, 0.1422],
[ 0.9414, 0.8189, -1.6414, -1.5594],
[ 0.8189, 1.5604, -1.5594, 0.6718],
[ 1.5604, 0.1422, 0.6718, 1.2319],
[-0.4093, 0.6691, -0.2858, -0.4375],
[ 0.6691, 1.4003, -0.4375, -1.1301],
[ 1.4003, 0.7444, -1.1301, 0.7377],
[-0.2858, -0.4375, -0.0956, -0.1844],
[-0.4375, -1.1301, -0.1844, 0.7697],
[-1.1301, 0.7377, 0.7697, -0.3077]],[[ 0.4264, -0.0700, 1.5027, 3.1625],
[-0.0700, -1.5600, 3.1625, 0.6080],
[-1.5600, -0.0491, 0.6080, -1.8794],
[ 1.5027, 3.1625, -0.3148, 0.6377],
[ 3.1625, 0.6080, 0.6377, -0.7242],
[ 0.6080, -1.8794, -0.7242, 0.1692],
[ 0.2757, -0.5403, 0.1504, -0.4671],
[-0.5403, 0.7748, -0.4671, 0.9355],
[ 0.7748, -1.1795, 0.9355, 1.3050],
[ 0.1504, -0.4671, -0.4920, -0.8581],
[-0.4671, 0.9355, -0.8581, 0.0559],
[ 0.9355, 1.3050, 0.0559, -0.0446],
[ 2.1627, 0.6758, -0.1105, 0.8299],
[ 0.6758, -0.0968, 0.8299, -0.3827],
[-0.0968, 1.3401, -0.3827, -1.0687],
[-0.1105, 0.8299, -0.2234, -1.0423],
[ 0.8299, -0.3827, -1.0423, 1.2436],
[-0.3827, -1.0687, 1.2436, -0.6514],
[ 0.8085, -0.4159, -0.1265, 0.2828],
[-0.4159, 0.2022, 0.2828, -1.3530],
[ 0.2022, 0.5747, -1.3530, 0.2831],
[-0.1265, 0.2828, -0.1571, 0.9005],
[ 0.2828, -1.3530, 0.9005, 0.4556],
[-1.3530, 0.2831, 0.4556, -1.4360],
[-1.2417, 0.1829, -2.0170, 0.7537],
[ 0.1829, 0.3825, 0.7537, 2.3406],
[ 0.3825, -0.8555, 2.3406, 0.5866],
[-2.0170, 0.7537, -1.1704, -1.8986],
[ 0.7537, 2.3406, -1.8986, -0.7958],
[ 2.3406, 0.5866, -0.7958, 0.2652]]])
fold_output:
tensor([[[[ 0.4198, 2.1070, 0.2304, 0.3510],
[ 2.3328, 1.3502, 4.8828, 0.7150],
[-0.2174, -2.4979, 0.6865, 0.3388]],[[-1.4956, 1.9493, -1.0290, 0.1722],
[ 3.4083, 3.8582, -2.7747, -3.8074],
[-0.1961, -0.6690, 0.7129, -1.2329]],[[-0.9843, -1.6178, 3.7424, -0.2860],
[ 0.1920, -7.0003, -0.4904, 1.8766],
[-0.1675, 2.2995, -0.9917, -1.2953]],[[-1.2368, 1.1334, 2.8331, -2.2567],
[ 1.8829, 3.2758, 6.2418, 0.2843],
[-1.6414, -3.1189, 1.3435, 1.2319]],[[-0.4093, 1.3382, 2.8006, 0.7444],
[-0.5717, -1.7500, -4.5204, 1.4754],
[-0.0956, -0.3688, 1.5395, -0.3077]]],
[[[ 0.4264, -0.1399, -3.1201, -0.0491],
[ 3.0053, 12.6500, 2.4319, -3.7589],
[-0.3148, 1.2753, -1.4484, 0.1692]],[[ 0.2757, -1.0806, 1.5497, -1.1795],
[ 0.3007, -1.8684, 3.7421, 2.6100],
[-0.4920, -1.7162, 0.1119, -0.0446]],[[ 2.1627, 1.3515, -0.1936, 1.3401],
[-0.2210, 3.3198, -1.5307, -2.1373],
[-0.2234, -2.0846, 2.4872, -0.6514]],[[ 0.8085, -0.8318, 0.4044, 0.5747],
[-0.2529, 1.1310, -5.4121, 0.5662],
[-0.1571, 1.8010, 0.9112, -1.4360]],[[-1.2417, 0.3659, 0.7650, -0.8555],
[-4.0339, 3.0146, 9.3626, 1.1733],
[-1.1704, -3.7972, -1.5917, 0.2652]]]])以上面代码输出为例，其实是以如下的格式对原数据进行组织排列的：
在各滑动窗中按行展开（行向量化），然后转置成列向量, 是im2col的批量形式。然后，对Unfold()的结果以相同参数运用Fold()后（Fold()的讲解在下面，这里先给出结果），结果如下：nn.Fold() 是 nn.Unfold() 函数的逆操作。 （参数相同、滑动窗口没有重叠的情况下，可以完全恢复【真互逆】。滑动窗口有重叠情况下不能恢复到Unfold的输入）需要注意的是，如果滑动窗口有重叠，那么重叠部分相加【倍数关系】。同时，如果原来的图像不够划分的话就会舍去。在恢复时就会以 0 填充。输出：batches_img: tensor([[[[0.0174, 0.3919, 0.0073, 0.4660, 0.6537, 0.0584],
[0.9763, 0.9982, 0.6250, 0.1332, 0.2123, 0.9500],
[0.5482, 0.4291, 0.9430, 0.6837, 0.6975, 0.1992],
[0.5275, 0.6800, 0.0490, 0.0350, 0.8571, 0.2449],
[0.3719, 0.7484, 0.7677, 0.4164, 0.2151, 0.8875],
[0.0784, 0.3839, 0.7567, 0.4217, 0.3208, 0.3025]]]])
patche_img.shape: torch.Size([1, 9, 4])
tensor([[[0.0174, 0.4660, 0.5275, 0.0350],
[0.3919, 0.6537, 0.6800, 0.8571],
[0.0073, 0.0584, 0.0490, 0.2449],
[0.9763, 0.1332, 0.3719, 0.4164],
[0.9982, 0.2123, 0.7484, 0.2151],
[0.6250, 0.9500, 0.7677, 0.8875],
[0.5482, 0.6837, 0.0784, 0.4217],
[0.4291, 0.6975, 0.3839, 0.3208],
[0.9430, 0.1992, 0.7567, 0.3025]]])
inputs_restore: tensor([[[[0.0174, 0.3919, 0.0073, 0.4660, 0.6537, 0.0584],
[0.9763, 0.9982, 0.6250, 0.1332, 0.2123, 0.9500],
[0.5482, 0.4291, 0.9430, 0.6837, 0.6975, 0.1992],
[0.5275, 0.6800, 0.0490, 0.0350, 0.8571, 0.2449],
[0.3719, 0.7484, 0.7677, 0.4164, 0.2151, 0.8875],
[0.0784, 0.3839, 0.7567, 0.4217, 0.3208, 0.3025]]]])相较于上面的代码，变化仅此输出为：batches_img: tensor([[[[0.6072, 0.9496, 0.4149, 0.1085, 0.6808, 0.3949],
[0.9770, 0.4831, 0.3964, 0.6597, 0.1749, 0.7326],
[0.4379, 0.0159, 0.2946, 0.4129, 0.1445, 0.5479],
[0.1664, 0.6725, 0.5104, 0.4171, 0.6656, 0.3146],
[0.5126, 0.2331, 0.8167, 0.2695, 0.6420, 0.8591],
[0.2282, 0.6300, 0.9205, 0.6741, 0.6085, 0.7866]],[[0.7943, 0.8348, 0.5379, 0.1951, 0.2629, 0.7281],
[0.5726, 0.4912, 0.5636, 0.7816, 0.9746, 0.3764],
[0.5440, 0.3434, 0.5914, 0.5925, 0.9556, 0.0455],
[0.0810, 0.0730, 0.2580, 0.0785, 0.2483, 0.3810],
[0.4182, 0.7024, 0.4904, 0.6935, 0.1789, 0.1015],
[0.2571, 0.9138, 0.1987, 0.6266, 0.0760, 0.4618]],[[0.3554, 0.2476, 0.3415, 0.5014, 0.1018, 0.3563],
[0.2180, 0.5690, 0.9975, 0.8152, 0.5812, 0.2704],
[0.5717, 0.9419, 0.4398, 0.5708, 0.2666, 0.3507],
[0.3868, 0.6889, 0.0326, 0.7873, 0.7444, 0.8057],
[0.1440, 0.9667, 0.2522, 0.9718, 0.6078, 0.2911],
[0.1442, 0.3061, 0.4116, 0.4190, 0.2343, 0.2608]]]])
patche_img.shape: torch.Size([1, 27, 4])
tensor([[[0.6072, 0.1085, 0.1664, 0.4171],
[0.9496, 0.6808, 0.6725, 0.6656],
[0.4149, 0.3949, 0.5104, 0.3146],
[0.9770, 0.6597, 0.5126, 0.2695],
[0.4831, 0.1749, 0.2331, 0.6420],
[0.3964, 0.7326, 0.8167, 0.8591],
[0.4379, 0.4129, 0.2282, 0.6741],
[0.0159, 0.1445, 0.6300, 0.6085],
[0.2946, 0.5479, 0.9205, 0.7866],
[0.7943, 0.1951, 0.0810, 0.0785],
[0.8348, 0.2629, 0.0730, 0.2483],
[0.5379, 0.7281, 0.2580, 0.3810],
[0.5726, 0.7816, 0.4182, 0.6935],
[0.4912, 0.9746, 0.7024, 0.1789],
[0.5636, 0.3764, 0.4904, 0.1015],
[0.5440, 0.5925, 0.2571, 0.6266],
[0.3434, 0.9556, 0.9138, 0.0760],
[0.5914, 0.0455, 0.1987, 0.4618],
[0.3554, 0.5014, 0.3868, 0.7873],
[0.2476, 0.1018, 0.6889, 0.7444],
[0.3415, 0.3563, 0.0326, 0.8057],
[0.2180, 0.8152, 0.1440, 0.9718],
[0.5690, 0.5812, 0.9667, 0.6078],
[0.9975, 0.2704, 0.2522, 0.2911],
[0.5717, 0.5708, 0.1442, 0.4190],
[0.9419, 0.2666, 0.3061, 0.2343],
[0.4398, 0.3507, 0.4116, 0.2608]]])
inputs_restore: tensor([[[[0.6072, 0.9496, 0.4149, 0.1085, 0.6808, 0.3949],
[0.9770, 0.4831, 0.3964, 0.6597, 0.1749, 0.7326],
[0.4379, 0.0159, 0.2946, 0.4129, 0.1445, 0.5479],
[0.1664, 0.6725, 0.5104, 0.4171, 0.6656, 0.3146],
[0.5126, 0.2331, 0.8167, 0.2695, 0.6420, 0.8591],
[0.2282, 0.6300, 0.9205, 0.6741, 0.6085, 0.7866]],[[0.7943, 0.8348, 0.5379, 0.1951, 0.2629, 0.7281],
[0.5726, 0.4912, 0.5636, 0.7816, 0.9746, 0.3764],
[0.5440, 0.3434, 0.5914, 0.5925, 0.9556, 0.0455],
[0.0810, 0.0730, 0.2580, 0.0785, 0.2483, 0.3810],
[0.4182, 0.7024, 0.4904, 0.6935, 0.1789, 0.1015],
[0.2571, 0.9138, 0.1987, 0.6266, 0.0760, 0.4618]],[[0.3554, 0.2476, 0.3415, 0.5014, 0.1018, 0.3563],
[0.2180, 0.5690, 0.9975, 0.8152, 0.5812, 0.2704],
[0.5717, 0.9419, 0.4398, 0.5708, 0.2666, 0.3507],
[0.3868, 0.6889, 0.0326, 0.7873, 0.7444, 0.8057],
[0.1440, 0.9667, 0.2522, 0.9718, 0.6078, 0.2911],
[0.1442, 0.3061, 0.4116, 0.4190, 0.2343, 0.2608]]]])kernel_size=(3,3),stride=2输出为：batches_img:
tensor([[[[0.4171, 0.0129, 0.2183, 0.0610, 0.5242, 0.9530],
[0.7112, 0.7892, 0.2548, 0.4604, 0.7200, 0.0294],
[0.0754, 0.0451, 0.2892, 0.6765, 0.8671, 0.5574],
[0.4220, 0.4499, 0.8946, 0.0149, 0.6790, 0.0719],
[0.1529, 0.2815, 0.8502, 0.5781, 0.0339, 0.9916],
[0.6900, 0.4843, 0.3190, 0.0676, 0.8558, 0.0060]]]])
patche_img.shape: torch.Size([1, 9, 4])
tensor([[[0.4171, 0.2183, 0.0754, 0.2892],
[0.0129, 0.0610, 0.0451, 0.6765],
[0.2183, 0.5242, 0.2892, 0.8671],
[0.7112, 0.2548, 0.4220, 0.8946],
[0.7892, 0.4604, 0.4499, 0.0149],
[0.2548, 0.7200, 0.8946, 0.6790],
[0.0754, 0.2892, 0.1529, 0.8502],
[0.0451, 0.6765, 0.2815, 0.5781],
[0.2892, 0.8671, 0.8502, 0.0339]]])
inputs_restore:
tensor([[[[0.4171, 0.0129, 0.4365, 0.0610, 0.5242, 0.0000],
[0.7112, 0.7892, 0.5095, 0.4604, 0.7200, 0.0000],
[0.1507, 0.0902, 1.1567, 1.3530, 1.7342, 0.0000],
[0.4220, 0.4499, 1.7892, 0.0149, 0.6790, 0.0000],
[0.1529, 0.2815, 1.7005, 0.5781, 0.0339, 0.0000],
[0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000]]]])# 重复累加次数最多的元素：
batches_img[0,0,2,2]*4
# 输出：tensor(1.1567)注： 使用 Unfold + Matrix Multiplication + Fold 来代替卷积时，Fold 中的 kernel size 需要为 (1,1)到此，相信大家对“Pytorchnn.Unfold()与nn.Fold()怎么使用”有了更深的了解，不妨来实际操作一番吧！这里是百云主机网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！

相关推荐: node中的filename和dirname如何使用

这篇文章主要介绍“node中的filename和dirname如何使用”，在日常操作中，相信很多人在node中的filename和dirname如何使用问题上存在疑惑，小编查阅了各式资料，整理出简单好用的操作方法，希望对大家解答”node中的filename和…