ensp单臂路由学习笔记

交换机vlan路由实验——单臂路由方式
网络拓扑图：路由器上的配置：system-view[R]interface Ethernet 0/0/0.1[R-Ethernet0/0/0.1]dot1q termination vid 10[R-Ethernet0/0/0.1]ip address 192.168.1.1 255.255.255.0[R-Ethernet0/0/0.1]q[R]interface Ethernet 0/0/0.2[R-Ethernet0/0/0.2]dot1q termination vid 20[R-Ethernet0/0/0.2]ip address 192.168.2.1 255.255.255.0[R-Ethernet0/0/0.2]q[R]display ip interface briefInterface IP Address/Mask Physical Protocol Ethernet0/0/0 unassigned up down Ethernet0/0/0.1 192.168.1.1/24 up up Ethernet0/0/0.2 192.168.2.1/24 up up

交换机上的配置：[S]interface GigabitEthernet 0/0/1[S-GigabitEthernet0/0/1]port link-type trunk[S-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20[S-GigabitEthernet0/0/1]q[S]interface GigabitEthernet0/0/2[S-GigabitEthernet0/0/2]port link-type access[S-GigabitEthernet0/0/2]port default vlan 10[S-GigabitEthernet0/0/2]q[S]interface GigabitEthernet 0/0/3[S-GigabitEthernet0/0/3]port link-type access[S-GigabitEthernet0/0/3]port default vlan 20[S-GigabitEthernet0/0/3]q实验结免费云主机域名果验证：PC1和PC2之间可以ping通

相关推荐: failover双活

A/A模式HA关键点：1、A/A failover 利用了多模式，在不同的物理设备上active不同的虚墙以达到双活目的2、主要在primary节点做配置，secondary节点会从primary节点同步配置，包含system和context3、seconda…